Questions & Answers for: replace carb 455 husqvarna

...455 dies out at full throttle or under load saw starts and runs fine at idle. runs fine at half throttle under no load. dies quickly at full throttle or under load Your carb may be the issue but your ...

Have not started saw in 4 mos. Now cannot start. Replaced fuel and still won't start. Did the saw sit for this time with gas in it? If so, the gas in the carb has probably turned to shellac. Take the ...

0.020". If nothing, the ignition module may be failing with heat. Good luck! you need either a new carb or a new coil. Test carb with spray, if starts then dies, replace carb. If no start replace coil

...455 rancher does not get the fuel to the spark plug. The fuel is in the fuel tank. If the problem is the carburetor, I do not have a manual diagram. Tom If you are looking for a diagram you will get ...

...carb husqvarna 141 chainsaw Fuel gets to the carb via the fuel filter in the tank, the fuel hose up to the carb, and the impulse from the engine making the pump diaphram in the carb pulse and pump ...

...AND SPARK PLUG HAS BEEN REPLACED Sounds like fuel starvation, always start with simple things first, replace the fuel filter in the fuel tank, check the fuel hose up to the carb for signs of

issue replaced carb, ran great for a day. Next day will not start and occasionaly back-fires through the carb. Any thoughts? Back firing can only be an ignition coil problem, replace the ignition unit

...the throttle and it bogs down? It idles fine but cannot get to full acceleration so I can cut. Sounds like a fueling issue. (lack of) Check fuel filter Check carb diaphrams, possibly replace and ...

replace fuel line on Husqvarna 455 You will need to pull the fuel line out of the fuel filler hole. Remove the fuel filter. Pull the line out of the tank. When re-installing the line cut the end at an

Husqvarna 455 starts ochoke on turn choke off or hit triger it dies replaced carb gas line spark plug and I get the same thing carb dirty or needs repair