Question about MultiPASS MP390 All-In-One InkJet Printer
...replace print head. head purchase...http://www.precisionroller.com/find/canon+mp390+print+head+printhead+multipass+multi-pass+mp+390.htm head ...
canon multipass mp390 Hi; guys I replaced my waste pad because it says it was full. I took it apart myself and change the pad. But now when I plugged it back in it comes up with that I have the wrong ...
...canon cartridge? Most cartridges have chips or fuses that burn out when the cartridge has been used. Then when you get it re-filled the cartridge is already rendered useless. If the cartridges are ...
...Canon MP390-recently having smears with black ink, colors print okay. I have done cleaning and deep-cleaning of print head, nozzle and alignment checks, changed the ink cartridge, which was empty ...
Question about MultiPASS MP390 All-In-One InkJet Printer
...but does not print anything. I have purchased a new print head & installed updated drivers an replaced the ink cartridges! This is a noisy printer and it makes all the noise but still blank ...
Question about MultiPASS MP390 All-In-One InkJet Printer
...canon mp390 is not recognising the cartridge change, keeps repeating to change the cartridges. many thanks brian oliver email [email protected] Hi, You can download the manual of ?Canon ...
Question about SmartBase MP390 All-In-One InkJet Printer
...replace with new ink tanks from Canon. Otherwise pull out the ink tanks and reinsert them. They may not be fully seated. New cartridges may be required to replace a bad cartridge; talk to Canon about ...
Question about MultiPASS MP390 All-In-One InkJet Printer
...You have a bad or empty ink cartridge; replace it You did not install a new cartridge correctly; reseat it and make sure it is correctly installed Your printer is broken: have it serviced Good
Question about MultiPASS MP390 All-In-One InkJet Printer
...I replaced both cartridges but the alarm keeps going off stating put in cartridge? i had same problem with 350 you need to google how to reset mp390 and follow instructions it sould be fine ...
black ink and it still alarms with put in cartridage. Is there another cartridge somewhere? better remove the cartridge and dip it in mild hot water for some time and replace it. it would do the trick
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions