Questions & Answers for: replace cable headphones

cable basically just slightly remove the headphones from the connection port on whatever you are connecting it to if that dosent work then most likely you have a lose connetion port on your device and

...replace ur headphone cable with new cable. just solder the cable with speaker inline pins.. the main problem is cut wire near the headphone...you need some tools to repair it..if you can repair by ...

...cable Very same problem as above, however I've replaced the cable entirely. See my tip on replacing Dodgy cables plugs on headphones. There's a section which deals with if you still can't hear

The cable cord on the headphones separated around the middle section, is there a way to fix this? See my tip on replacing dodgy headphone plugs and cables.

...s a broken wire, obviously. it's probably broken near the jack or the headphone. ur going to have to replace the cable no doubt in that definitely it will be wire problem also check your headphone ...

I have a px 200-ii headphone and the cable snapped. Is there someway I can replace the cable? Looks like an easy fix Have a look at my Tip on Headphones, click my user name to find it.

...cable is broken. How do I replace it? Buy a good Jack to Jack cable, open your headphone, find out where the two cables are soldered, unsolder them. Cut one end of your new cable, remove the plastic ...

...Replace the speaker casingonto the headphone. It should snap back into place for models without screws Thanks. 1.Take your headset to an electronics store. Buy two male and one female headphone jacks ...

...replace the cable on Sony MDR-V6 headphones? I own the Sony MDR-V6 headphones and they are designed for studio situations, where the cord is really long and curly. I would love to replace the cord ...

replace cable speakers faulty, replace speakers One other possibility is the headphone jack itself. When you push the headphone plug into the jack on the tablet the audio is switched from the speakers