...Sanyo Pro xtraX when I turn it on the image is dim. The lamp replacement light is not on. Hi there Keep in mind that the light will only flicker if the bulb reaches a certain amount of hours or if it ...
...bulb Any Solutions?? Please Adam Hi there If you have the know how open up the machine and replace the fuse on the Powersupply board ( where the AC socket sits in ) If this still occurs , I'm afraid ...
...Sanyo Pro XtraX, with a bulb I replaced about 100 hours ago. The light is red on standy, turns green when I turn it on, but turns off and cools down after just a few minutes. this just started to ...
how do i change the bulb in a sanyo pro xtrax multiverse plc-xu30 prodjector remove the screw on the door on the bottom of the projector for the lamp and pull out the old bulb and replace
...replace the bulb, but buy TWO of them. One to fix the projector, the other as a spare on hand while awaiting another replacement bulb down the road. These metal-arc lamps typically run anywhere from ...
...bulb in my sanyo pro xtrax projector(xu35) and a few days of use and a vertical line came up on the side of the screen. Well after a few days this line has multiplied and it has gotten so bad that I ...
...replace the lamp I want to know if there's a way to start this thing. If the lamp would be broken I would expect there's a light telling me this. but there's nothing. My sanyo pro xtrax ...
sanyo pro xtrax projector the "lamp" LED turns red when plugged in and the ready light turns green. when the power button is pressed, the bulb projects the blue start-up screen then shuts off and the ...
Question about PLC-XE20 (Chassis XE2000) Replacement Projector Diamond Lamp 610-309-2706 / LMP55
...replace lamp light also lights up 1,Turn the projector on,press the Menu botton 2,Press the Left ,Right,Up or Down to find the "lamp usage" and the reset option. 3,select "Lamp replacement counter ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions