...the dimmer switch back (like you would to flash your brights at someone) the head lights will come on and as long as you continue to pull back on the dimmer switch the head lights will stay on
Question about 1998 Wrangler
...light switch, all the lights come on except for the headlights themselves (high beam arrows near the speedo came on too). I threw a couple of parts at it and that didn't solve the problem. Come to ...
...bright for the majority of the time now. Before I succumb to the dealership, any ideas for an at home fix? try checking the switch that turns normal lights to brights make sure there is no wire being ...
Question about 1995 Wrangler
bright have been illuminated. If we don';t use the brights the lighting system works fine. My neighbor just bought a 95 yj and has the same problem. What is the solution to this problem? I also have a
...no bright beams. Low beams work fine. Lights tested OK for continuity. No voltage to headlamp plug on the high beam side You will need to replace the dimmer switch or repair the plug that goes to
with the clutch not depressed. Do a search on the Internet for 94 jeep clutch pedal safety switch. If its an automatic it should have a switch on the transmission linkage to prevent starts out of park
bright, then come back on, then off again and so on. dimmer switch and ground wires replaced. You have a bad Head Lamp switch in the dash,It's over heating and the internal breaker is shutting the H/L
Question about 2008 Wrangler
Wipers, turn signals and bright lights are messed up on 2008 Jeep Wrangler The wipers are stuck on and the turn signals don't work. sounds like turn signal switch is bad
Question about Brake Light Switch Jeep Wrangler yj 95 94 93 92 91 Parts 56006247
where is the brake light switch located on a 1996 jeep grand cherokee location location location I would assume ALL brake light switches are behind the brake pedal
Question about 2014 Wrangler
...the door that switch is turned down to far turn it all the way up and the interior lights will come on flip it down just slightly and your dash lights should be bright.and the interior should go ...
Usually answered in minutes!
Step 2: Please assign your manual to a product: