Questions & Answers for: replace brake pad maytag washer

Question about SAV571EEWW Washer

1 Answer

Maytag Washer, SAV571EEWW It looks like the brake pads are in the bottom broken up. The washer spins 1 direction when in agitate cycle. yes if the pads are damaged it will spin in agitation. Pads are ...

Ad

Question about SAV571EEWW Washer

1 Answer

...brake tool, or seems clueless, have them send a different tech. Be sure they replace the parts - not just scuff up the pads and drum already in there - Maytag's buying! Unfortunately, there's no ...

Ad

Question about SAV4655A Top Load Washer

1 Answer

...maytag just spins during wash cycle, it does not agitate. During spin cycle it spins really fast and when the cycle ends, it won't stop spinning until it runs out of steam. sounds like you have a ...

Question about Dependable Care LAT9706

2 Answers

...brake accessible by taking the front panel off? Thanks Joe Here's the same advice I gave another person with a similar problem to yours. The squealing can be caused by the brakes, or a worn snubber. ...

replace the brake pads on a Myatg Washer sav515deww Pieces fell from th\e bottom of our washer, I looked them up and found out they where the brake pads !! Wow, I think it is the overload that my wife

...maytag performa, what i found out is that the brakes become crystallized, causeing a squeaking noise, remember in agitation, the brakes stops the the drum from spinning, what i advise you to do is ...

Question about SAV4655A Top Load Washer

1 Answer

cycle and I found black powder undr the machine That would be the brake. The brake stops the tub when turning. The brake pad is likely worn down to metal. You can get a replacement from partselect.com

Question about SAV571EEWW Washer

1 Answer

...brake pads on maytag washer The following link explains step-by-step how to replace the braker rotor and stator on the Maytag model you listed this question under: ...

Question about HAV3460AWW Top Load Washer

1 Answer

replace brake pads SAV5401aww drum barely turns by hand--very stiff. Feels like the brake is engaged. Burned and broke the belt. Only discovered brake issue after replacing the belt, which was easy ...

Machine agitates briefly making a loud noise, then stops. Fill and spin cycles work just fine. I just replaced the idler pulley and brake pads. One brake pad was broken. check gear box assy

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...