Question about 18-inch Electric Chainsaw Chain Saws
tighten so I know something is wrong but the manual doesn't have information on the tension pieces. the nut like end of the tention bolt should fit into a hole in the bar. Then as you unscrew the bolt
Question about 16" Electric Chain Saw Assembled 3.0 Peak
...chain saw blade How do you get the blade off the 16" electric chain saw? Where the bar meets the body of the saw there is an adjustment lug that will either push the bar outward tightening the chain ...
Question about 16" Electric Chain Saw Assembled 3.0 Peak
...bolt sometimes two nuts or bolts depending on brand and model on the side cover where bar and chain inter the clutch area remove those and cover will lift off second there is a screw that faces front ...
...replace the chain back over the drive gear and in the bar groove all the way around the bar. It may be necessary to turn the bar adjuster screw more to provide enough slack in the chain to do this. ...
...tighten 14" electric chain saw, lost manual Undo the bolts on side that hold the bar..adjust the bar and chain by pushing it away fromyou.. There may be a finer set screw that youwill have to adjust ...
...replace the toothed belt on my castelgarden ride on lawnmore tcr 102 THIS IS GENERAL to most chain saws. Look for 2 nuts on the bar side of the chain saw. They are normally an inch or 2 back from the ...
I can't keep the chain tight on the chainsaw After adjusting make sure to tighten the bar bolts(nuts). If they're missing, replace them and tighten securely after adjusting the chain tension.
Question about 16 Inch Gas Chain Saw MCC1635AK
...a 20" chain. I am worried if i take the ruined nut off the bolt would fall off inside the machine. yes you can replace just the nut any hardware store can match it up just make sure its a lock ...
...should be 2 bolts holding the chain bar in place. Then make sure there isnt another bolt or screw you missed, pop off cover put chain on, replace chain guard and tighten chain. It should be that ...
Question about Chain Saw. 20 in. 46 cc Gas Chain Saw RY10521
Need help to replace the plastic flywheel cover after cleaning. Thanks it only goes one way,put the bolts in and tighten
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions