Questions & Answers for: replace blower motor resistor trooper

...blower is the problem how do I remove and replace? Help, Hot it VA! Ok, you need to check firstly that the motor is ok - probably is fine. Make up two long ish wires with female insulated spade ...

replace the blower motor speed control resistor. I would think the OP has checked the coolant level. It could be a lot of things, blend door is stuck, blend door actuator gone bad, leaky hose, and the

...replace heater fan blower motor The blower is under the dash behind the glove box and the under splash under the glove box needs to remove to seee the motor housing. it'll have a heavy (10 Ga.) two ...

replace the switch. Use a test light to test all the wires,to see that they all light up the test light,note,some wires will only light the test light dim,this is normal,cause this controls the speeds

blower motor fan needs replacing. Use a normal globe test light to check this. If no power on any wires to fan go back and check all fuses in car and under bonnet with same test light. If fuses are ok

...blower motor works on high, the resistor is the fault.  Check condition of wire harness when you replace the resistor, if there is any corrosion on the connectors in the harness- replace that ...