Questions & Answers for: replace blend door motor 2000

...replace. Before you purchase a new blender motor first check to be sure this is the problem. (1) The door on the glove box can be lowered and you can put your hand on the plastic box (the motor is ...

...blend door motor located on the bottom of the heater/AC plenum which is located behind the dash. You can remove this motor and see if the door moves correctly. If it does not, you will probably have ...

...blend door motor has failed , it is common , go to an automotive repair shop and get a free estimate for repairs. I thought I had this problem when I first read your post, but it turned out to be a ...

...blend door that the actuator motor goes into was broke. When you pull the actuator out look into the hole and see if you see a d shape piece coming out of the box if it is not d shape it is broke ...

...just wont blow cold air, how do i fix this? This problem is caused by a defective Air Temperature control blend door actuator motor deep inside the dash, to replace this part u must remove the

...replace the blenddoor motor? I have a 2001 Ford Winstar that is making the clicking sound and now is not throwing out heat though the fan works and so does the AC. Female here who loves autos but has ...

it is a very easy fix, and shouldn't be too expensive with an honest mechanic. Replace the temp control actuator. It's the blend door actuator, located behind the radio/climate control assy's

blend door was in fact broken. Being a hands-on guy with a need to know more before I spent ~$800 for the repair I found this site. THANK YOU THANK YOU!! The information about the Heat and AC Actuator

...blend door opened when I teted it. Please help and thank you in advance. So the blend door opens? Does the fan motor blow? Are both heater hoses hot? That would indicate the coolant is circulating ...