Questions & Answers for: replace blend air door 2003

...deep in the dash that sets the temperature of the outlet air, it is called a air temperature control blend door actuator, it has failed, in order to replace this part u must remove the dash

...replace the blend motor/door on a 2003 ford explorer. it only blows cold air with a ticking noise when turned to heat if the blend door motor is really problem warrenty time calls for 7 hours which ...

I have a 2003 ford eplorer..the heather is blowing cold air and it makes a ticking sound the blend door actuator is malfunctioning and needs to be replaced

...air blend door in the box under the dash that houses the heater core and the A/C coil. This door allows the different air temps to come through depending on your settings. The temp door is either ...

...blend air door motor almost every car maker now uses little electric motors to control heater door panels,put it in the position for it to make noise go under your dash find where it is usually ...

...blend door which mixes the hot and cold air sent to registers on dash. As long as the temperature control setting is in the heat range this actuator will hold the door which wants to be normally ...

...blend door motor about 2 weeks ago as I had the terrible clicking sound and no heat. Then tonight I replaced the blower motor resistor. The second fix helped as there was no air flow when it was on ...

replace these parts (blend door and blend door actuator) you must remove the entire dash from the car. Always have this problem confirmed by a dealer or qualified repair shop as it is a very expensive

...replace I also have professional scan tool software & can see the codes for the motors in enhanced data. The-- Vent Blend Doors-by name Defrost-up top Cabin -the vents as you say in the middle ...

...blend doors control the heat/cool ratios as well as the location the air will blow from. It's very common for the doors to break or the motor to fail and require replacement which can be costly. Its ...