Questions & Answers for: replace belt wheelwriter

...are available but are a bit tricky to install. DickyO My IBM Wheelwriter III does not print the letters. I have replaced the ribbon but still no letters. Please help. Thanks. replace hammer ...

Wheelwriter 3 We have one that the belt is stretched and keeps coming off. Where can I purchase a replacement? I found a local service center to repair.

...replace the main belt from the motor to the driveshaft? Is there a [magic] break in the shaft to slip the new belt on? Thank you I assume you are talking about a IBM selectric, this is a job that ...

...Wheelwriter 5 is locked up All lights are on - it just sits there and hums. The carriage moves easily, the belt appears to be tracking fine - the cartridge is properly seated . . . any suggestions??? ...

the belt slipped after the metal bar slipped i attempted to push left side in the belt slipped now the bar is in i cant put the belt back on The belt has probably slipped down below the carrier, it's ...

...belt back on my wheelwriter 1500 typewriter Move the carrier near the right side, loop the belt on the R. pully. pull the belt to the left, be sure thebelt is not under the carrier, as they usually ...

Wheelwriter 30 Typewriter: it just keeps beeping and won't work... It just keeps beeping and won't work A lot of maybes check the printwheel to be sure it is properly installed, see if the carrier ...

Why doesn't my IBM Wheelwriter 1000 work when I turn it on? My IBM Wheelwriter is plugged in but won't work when I turn it on. The outlet works because I have other machines plugged into it. blown ...

wheelwriter 1000 lexmark typewriter makes this hummin sound as though its stuck. Lube the round chrome rod that goes throught the carrier, Carier is what hold the ribbons and daisy wheel. Lube pulleys

...Wheelwriter 6 series II, turns on all lights come on solid. will not function If it makes a growling noise or you cac hear a motor running the carrier belt may be broken or the plastic drive gear ...