...Replace the pads if they are scaled up and remove any scale from the louvered panels. WITH THE POWER OFF, check the belt for cracking and check to drive motor and blower wheel bearings for smooth ...
the fan noise will grow as the bearing wears down. Eventually the fan will need to be maintained or replaced
Question about 67471 Evaporative Cooler Air Conditioner
...Replace the pads if they have calcium build up or dry. Flush the water pan out and clean the Add some oil to the pillow blocks which are the bearings at each end for the blower. Check the belt and ...
...up will stop the pump. Open the bottom of the pump and spin the impellers if it wont spin just replace the water pump with one of correct size and voltage. Is voltage getting to the pump motor?
Question about 67471 Evaporative Cooler Air Conditioner
...cooler has "pillow bearings" where the squirrel cage fan rests in the frame. They must be lubricated with oil at least yearly. If they go dry the bearings can wear out and cause the noise. Oil them ...
...cooler is a little over a year old. I believe the 6SBAR has an evaporator fan located behind the evaporator plate ( the cooling plate) inside the unit. They had some issues with the bearings in those ...
be on without the motor running. Some motors can have their bearings repaired, other motors must be replaced. There are some units that use a fanbelt from the motor to the fan blade and it is possible
Question about 67471 Evaporative Cooler Air Conditioner
...cooler but the freezer is working fine? [email protected] This is a common problem, and worth fixing if the frig isn't to old. The frig is making cold air just fine, which is a plus! All we need ...
Question about Adobe Air 550 CFM Portable Evaporative Cooler, 8? Blower # P500
...accept the fan blower unit when turn on. Switch panel lights up but no blower operation. Are their replacement parts for this unit and if so where would one look to obtain them? Thank you. The ...
Question about 67680 Evaporative Cooler Air Conditioner
...replace the fan (squirrel cage) on a Mastercool 6500 series but dont know how to remove it. can someone tell me how? its a downdraft mastercool evaporative cooler and it looks like i will have to ...
Usually answered in minutes!
2,517 Questions
1,056 Questions
713 Questions
416 Questions
354 Questions