...ball joints on older model chevys but this one looks different so I wanted to be sure before I start on it. Will the new ball joint have to be pressed in? Or is it possible to drive it out after I ...
...replace the ball joints,and was told that the ball joints and control arms have to be replaced as a unit.Is this true? U CAN REPLACE JUST THE BALL JOINT OR THEY COME WITH THE ARMS.DEPENDING ON ...
...like there are pressed in revits, do I drill them out? Or do they need to be broken out with some type of splitter? Yes you can drill them out. The new ball joints should come with nuts &
...ball joints and tie rod ends and did a 4 wheel alignment and had the tires rotated and balanced and my 99 tahoe vibrates at 65 and higher speeds. not sure if it's comming from the front or rear. It ...
chevy tahoe 4x4 had the same problem wont turn right at idle - like no power steering , has hydoboost brake steering system , did test and found steering box bad , removed box and remove the top cover
my 1999 chevy tahoe looks like? The thermostat is inside a round ball at the engine side of the upper radiator hose. There are two bolts holding the housing to the engine and a paper gasket to seal it
chevy tahoe i allready change all of my breks and same thing This happened to me. I had rear end replaced, springs, shocks and universal joints replaced and still same issue. I dropped drive shaft and
Question about 2001 Tahoe
...at slow speeds some times at highway speeds. We can go days without hearing it. It doesn't change if you brake, turn or speed up. 2001 Chevy Tahoe LT4x4 5.3L maybe a wheel bearing or ball ...
...ball joints are worn out. the upper ball joint only comes in upper control arm assembly and thought may also just buy the lower control arm assembly as well to avoid any pressing of ball joints ...
replace upper ball joint chev tahoe Replace upper ball joint chev tahoe YouTube
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
