Questions & Answers for: replace 3rd brake light 2010

...brake-lights-stay-on-with-pedal-let-up get the tail light changed on ur malibu . You are likely eligible to have this repaired or reimbursed for the repairs due to a recall by Chevy on the Malibu ...

05 malibu, only third brake light works replace the brake light switch, it has 2 stages in it, one for 3rd brake light and one for the others

3rd Brake light doesn't work on a 2005 Malibu Ls The most common reason for the 3rd brake light not to work is mostly due to a blown bulb, some cars have two or three bulbs in the 3rd light, start

...Brake light Problem when pedal up or when key on brake lights are on Disconnect the brake light switch under the dash above the pedal, if the brake lights go off adjst or replace the

...replace the high mount brake light on my 2011 Chevy Malibu? You need to take the back seat out. Remove the C-Pillar trim panels. Lift up on the package shelf. Unplug the wiring connector. I've had ...

...replace third mount break light 2010 Chevy Malibu lt Remove the rear window package shelf. Disengage the rear window shelf insulator from the rear shelf trim panel in order to get to the high mount ...

...always on,even after brake light switch assy was replaced Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem. Best ...

3rd brake light on a 2010 malibu has a short? I think Check the wire connection to the brake light, follow the wire as far as you can, A pinched or split wire can minimize electric current flow enough

brake light and emergency flasher don't work. I replaced the bulb and the column switch with no success. If I put the 4-way flashers on with the ignition off, the light will flash, but rapidity on the

3rd brake light works only with key in accessory position? not in on or car running? 2005 chevy malibu. 3rd brake light works with key in accessory postion. soon as you turn key on or start car the ...