Questions & Answers for: replace 2001 ford focus hood

Question about 2001 Focus

1 Answer

...opens from the front of the car with the key. to do this you swing the ford badge up insert the key, turn it one way to pop the hood then turn it the other way to release and lift it at the same ...

Ad

hood open or the handle replaced you can use a set of vice grips and pull on the inner cable. looks just like a hand brake cable on a bike. as for handle just get it from ford. only 2 bolts holding it

Ad

...replace a 2001 ford focus headlight switch assembly p, li { white-space: pre-wrap; } Turn the engine off, open the hood, and disconnect the negative battery cable (--) with your pliers. Locate the ...

Question about 2000 Focus

2 Answers

...ford focus popped to release but I can not open the hood of the car? what should I do? Might just be stuck. Have someone pull the release as you FIRMLY pound on the front of the hood in the middle ...

Question about 2001 Focus

1 Answer

...hood open release cable won't pull Hood latch or cable is frozen up (rusted).  These can be a challenge to get fixed, because you don't have access.  You can try to see if you have ...

Question about 2001 Taurus

1 Answer

open hood of 2001 Ford Taurus inside hood release will not work Cut back the hood release cable end and use a pair of locking pliers to pull the inner core and release the latch..

Question about 2001 Focus

1 Answer

2001Ford Focus hood release cable I want to replace the hood release cable Remove the handle inside the cap. Your goal is to get 2-3 inches of cable so you can use a vise-grip to pull open your hood.

handle under the dash is broken and I need to replace the complete hood release cable assembly Long at the base screw next to the handle. You need to make space on the handle end to pull the latch off

Ford Focus When I pull the lever inside of my car to open the hood, the hood does not open. Have someone lean on the hood as you pull the release, it might be jamming up somewhat. If that doesn't work

...the suv Cable is stretched/sprung. Access hood release panel and pull cable with channel locks.. or worse, something is stuck in the latch mechanism under hood. See repair rep at Ford in any

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...