Questions & Answers for: repair headset wires

...headset, so it won't hurt to try a repair.If you have a Motorola HS850 that works, it might be a good idea to open the boom and put a small spot of silicone adhesive on the wires to keep them out of ...

...repair? sony headset, cut wire. no sound If you matched all the wire up in their original configuration then there is not much else to be done.you could try taping them individually so that none of ...

wires on headset My dog took a bite on the headset wire, i repaired the wire and now the headset / mic dont work. Is there a trick to repairing broken wires after exposing the enameled wires...light a

repair shop to get the wires re-run/connected. If it's a wired headset then you may have (and in my experience this is the most common) pulled the cord and some point and basically dislodged the cable

...headset worked properly at the beginning and now only one side is working. I tried with other headsets and it's working. thank you for your help actually what happened is the one which is not working ...

...headset) is already broken. First, see if the head set is the problem, other wise bring it to the repairer who can fix that very carefully because if you will be the one who will fix that yourself, ...

I have a pair of Skull Candy and my grand daughter cut the cable,can they be repaired They probably could be repaired, but it would require stripping of the wire and connecting the correct wires back ...

...repair??? Carefully strip back the outer insulation you should see different color coded wires just carefully strip the wires back to make a condictor connection and match them by color and use ...

or i have to pull the cord. sounds like you have a loose wire inside. suggest you get it repaired. unless you have the patience and skilll to repair it yourself. the wires are really thin in headsets

...repair a broken wire in my Motorola H710 Bluetooth headset See if this helps you even though it is a different model. If you know it is a broken wire, you can just solder it. The way technology ...