Questions & Answers for: repair haier lcd tv sound

...Haier Tech support and attempting to solve the problem over the phone with either a repair/replacement. if that fails, i would definately suggest getting the TV repaired some how, having unsafe ...

...repair shop. I own a smaller Haier LCD TV and it works perfectly. As a PROFESSIONAL technician, I dont suggest trying to repair this television yourself. The TV has transformer/inverter issues on the ...

...repair issue. You won't be able to address the problem with troubleshooting. There is a part inside the TV that needs to be replaced. If you're under warranty, this will cost you nothing. If you're ...

...TV'S COMPONENTS BURN OUT MOST LIKELY A CAPACTIOR, DIODE AND OR RESISTOR. LCD'S ARE VERY TOUCHY IF YOU TRY TO REPAIR IT YOURSELF PLEASE UNDERSTAND THAT OPENING IT WILL VOID ANT WARANTY YOU MAY

repair shop. I own a smaller Haier LCD TV and it works perfectly. Now,u plug in the tv u get a solid red standby power red LED light in the front of the LCD panel right?When u push the power button on

Haier tv Corp.Take ur tv warrenty repair. No sound on ALL modes? Let verify first to narrow down to where the problem can be. First, make sure the MUTE or SAP function is not activated, then check the

haier HL40XP1 and the screen goes black when i turn it on, but the sound is still there. Most likely your back light has gone out. If you turn it on to a channel then get right up to it you should see

...somewhere in the tv and it may cause a fire. i wouldnt turn it on again until you get it to a repair shop. Does it do it when the volume is at the minimum? does it come from speakers or inside the

Haier LCD TV Stand by light is blinking no picture no sound. Power supply is O.K. These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you ...

...HAIER MODEL TRINTRON , I HAVE NO PICTURE ONLY SOUND IS THERE , PLEASE SOLUTION, SOUND & PICTURE BOTH FACILITY. Back - light problem.Check and replace damaged component/s at its back-light inverter ...