printer panel select maintenance..and choose clean printhead.. to clean the nozzles of the printhead.. and also try wipe it on a wet cloth to remove the clogs..that cover the nozzles.. please rate it.
...is actually wrong. If the carriage is not stuck in the right corner, try removing the printhead. If it powers up with the printhead removed, you need a new printhead. The new printhead is around ...
Question about Pixma iP4500 InkJet Printer
canon ip4500 printer? With power on, you lift the lid like you are changing ink, you remove all the inks and then lift the gray handle to release the printhead. It tips toward you at the top and lifts
Question about Pixma iP4500 InkJet Printer
...Canon printer and I resorted to buying a new one. Is there anything I can do to get the ink flowing? Hi! There are different possible and safe ways to clear the clog in your cartridges.. The basic ...
...Canon pixma iP4500. Just put in new black refills from inkjet superstore. Did you take the protective tape off of the new black refill? This would cause it not to print black. Hi, The following may ...
...printhead to the left. The white wiper part is in front and has to be pushed back. Then the purging pad should spring back in its normal position. Check the purging pad for saturation of Ink, if ...
...reinstall the printhead Second option: Reset the printer Third option: Replace the printhead If you need any technical help on printer then you can reach at
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions