Questions & Answers for: removing platter

my drive belt on my optimum turn table has come of how do i put it back on? Hi mcmassous Refitting the belt is easy. 1.) Remove rubber pad/mat. 2.) Remove platter just beneath mat. Some platters are ...

Removing platter I have a technics turntable model SL B300 which I haven't been able to find any information about it.I picked it up from a friend don't know much about it.Platter turns very slow.How ...

removing the platter to oil the motor shaft I have a technics SL-QD33 I just broke out after sitting for a while and noticed it said to lube the motor shaft. The drawing suggest the platter is removed

I had to order a belt for my turntable that was disinagrated so I dont know how to put the new one on. could you please either show me a picture of how it goes on or explain First, remove the rubber ...

replace turntable belt To replace a drive belt. 1, Remove the rubber platter mat to expose the platter. 2. Put your thumb and forefinger through the two round holes and lift the platter off. You may ...

replace belt To replace a drive belt. 1, Remove the rubber platter mat to expose the platter. 2. Put your thumb and forefinger through the two round holes and lift the platter off. You may need to ...

I HAVE A PIONEER PL-30 TURNTABLE AND I NEED TO REMOVE THE 'PLATTER' IN ORDER TO REPLACE THE BELT. THERE IS NO CLIP TO REMOVE. HOW DO I GET THE 'PLATTER' OFF. AGAIN THERE IS NO CLIP FOR REMOVAL. Pull ...

how do i remove platter on Beocenter 7007 how to remove disc platter From the Beocenter 7007 manual: "If you ever want to remove the platter, lift the record spindle and then insert your fingers under

Platter warped The platter is spinning but looks warped, not sure if the actual platter is the problem or the bit underneath, I haven't been able to remove the platter Most platters are fixed by a ...

How to remove Platter on JVC L-A120 Turntable I'd like to change the belt, but cannot remove the platter. Videos of similar models show the platter simply lifting off. there is no clip either. Hi Jeff