Questions & Answers for: removing key cylinder without 1998

a dealer to program...should be under 200 dollars If the theft system is factory, there may be a disarm switch on LF door lock cylinder. Cycling the key to lock and unlock a couple times should disarm

...cylinder is jambed, if you remove the covers and put the key in, you might be able to turn it with pliers, just turn it to the accessories position, then there is a small metal clip that pushes in, ...

...runs from inner fender to bottom of bumper. once loose you gain access to back of fog light where mounting bolts are located if its just the bulb your replacing you can also do that without removing ...

1998 dodge neon starter replacement my 1998 dodge neon won't start i preplaced the starter but it still clicks when i turn the key and it still won't start what can the problem be? bad batt.

lost my key to a 98 neon how can i start it without the key You can't unless you destroy your steering comumn. Go to a dealer and have a key made, according to your vin.

...cylinder, codes 12 and 55??? Code 12 Problem with the battery connection. Direct battery input to PCM disconnected within the last 50 ignition key-on cycles. Code 55 Completion of fault code display ...

cylinder housing from the steering column of my 1998 dodge neon as it was smashed when it was stolen. I have removed everything from the steering column but the cylinder housing and can not get it off

...key cylinder.  Remove the top and bottom steering column covers.  Once that is removed you should be able to see the outside molding of the key cylinder.  There is a special tool that ...

How to remove the lock cylinder without a key for my 2001dodge neon To answer this would possibly aid criminal behaviour. Consult your Dodge dealership.

key for the new lock cylinder. It's important to note that this is a general guide, and specific instructions may vary depending on the year, make, and model of your vehicle. It's also important to be