IMac I purchased two 256mb modules because I was told by the seller that this would increase memory to a total of 512mb. (I'm starting to have my doubts about this!) I installed the first chip without
...imac, i have installed the cd and set up the printer wirelessly but when i go to print it says there is a error and the printer is off line even though the printer tells me it's online...i'm confused ...
iMac so I can change the hard drive place the screen face down on a cloth Go to where the speaker is located and you will see 3 ot 4 screws depending on the model remove those screws and lift the case
Question about 27" iMac 2.8GHz Quad-Core Intel Core i5, 8GB RAM, 1TB Hard Drive, ATI Radeon HD 5750, SuperDri... (Z0JPI584X215750) Mac Desktop
...it's not at all obvious how to do it! Check the linked YouTube video ... starting at 12 minutes in. (Start in at 9 minutes to see how to do it wrong - LOL!) Monitors In Motion Stand for the iMac ...
Question about 27" iMac 2.8GHz Quad-Core Intel Core i5, 8GB RAM, 1TB Hard Drive, ATI Radeon HD 5750, SuperDri... (Z0JPI584X215750) Mac Desktop
remove imac stand ifixit.com
Question about 21.5" iMac Intel Core i3 3.2GHz, 4GB RAM, 1TB Hard Drive, ATI Radeon HD 5670, SuperDrive, Apple Keyb... (Z0JM56704GB1TNUM) Mac Desktop
remove imac stand
Question about 21.5" iMac Intel Core i3 3.2GHz, 4GB RAM, 1TB Hard Drive, ATI Radeon HD 5670, SuperDrive, Apple Keyb... (Z0JM56704GB1TNUM) Mac Desktop
stand from a Apple imac How do you remove the stand from a Apple mac 27 inch It can get tricky. If you post the year your Mac was made, I can follow up with some instructions. Check out iFixit as well
Question about MD096LL/A 3.2GHz 27" iMac Desktop 2012
Motion Stand for the iMac Part Yes it can be remove if the model of your iMac is mid 2012 or earlier if I 'm not mistaken. The newer iMacs have to be ordered with the Vesa mount already built in to it
Question about MD096LL/A 3.2GHz 27" iMac Desktop 2012
...iMac and set it away from the computer. Move the stand upwards so you can see the panel with the three phillips head screws. Carefully loosen each one, NOTE: they do not come out, they will stay ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions