Questions & Answers for: removing dust cover hub 1999

Question about 1999 Ranger SuperCab

2 Answers

...1999. My 4 wheel drive is not working. I would like to know if there is a way to change the hub and make it a manual 4 wheel drive instead of automatic? there is a way to do that.....all you have to ...

Ad

...is a spring which holds the hub out, removing this spring and replacing the rubber dust cover and hub will lock your front hubs in continious. as is done on later models, This has worked for my 98 ...

Ad

Question about 1999 Ranger SuperCab

1 Answer

1999 ford ranger 4x4 wheel hub and bearing What is the size of the nut on the axle to take off the hub assembly? I am not sure of the size, but you should be able to reach it with an adjustable wrench

Question about 1999 Ranger SuperCab

1 Answer

...Ford Ranger xlt 4x4 The 4 wheel drive won't always kick in Looks like the electrics are working but the hubs just won't always kick in. I had the same problem w/ my 99. If you have auto hubs, they ...

Question about 1999 Ranger SuperCab

1 Answer

1999 4x4 ranger comes out of four wheel drive 1999 4x4 ranger comes out of four wheel drive when I reverse. Put manual lockers in it. And remember, you have to back up 50 feet to lock in the hubs, ...

Question about 1999 Ranger SuperCab

1 Answer

1999 ford ranger 4x4 wont engage have a 1999 ford ranger auto 3.0L sounds says its dropping into 4x4 when you turn the switch you can here it click in but its not engageing the front axle any one know

Question about 1999 Ranger SuperCab

1 Answer

heater core removal 98 ford ranger Disconnect heater hoses. Remove glove box. Remove cover over heater core,has a few 8mm screws. Replace heater core. Reassemble.Good luck.

Question about 1999 Ranger SuperCab

2 Answers

Ford Ranger 4 Wheel Indicator Lights on dash come on but front hubs do not engage. Recently had front ball joints replaced, could something have been done at that time to create problem. Vacuum lines,

Question about 1999 Ranger SuperCab

1 Answer

1999 Ford Ranger supercab P.U. has a switch for the 4wd to lock in, having problems with the switch engaging the hubs and when it does, sometimes it will come out. Can I change out the hubs to manual ...

dust cover unless necessary. • Do not reuse dust cover if removed. 5. Mark relative positions of dust cover and knuckle for proper reassembly. 6. Remove dust cover with a chisel. • Do not remove wheel

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...