...sensor module and timing belt. still no spark 1991 ford ranger 5 speed 4 cylinder front wheel drive probably the coil , but have your alternator checked first make sure your crank sensor is plugged ...
97 Ford Ranger 4.0L V6 Idles rough only when cold Only when you first start it... and only on cold days. Replaced MAF sensor. checked for vacuum leaks, none found. Replaced 2 O2 sensors. bank one and ...
...ford ranger 2.3 liter 1994 ford ranger 2.3 liter has 2 coil packs and 8 plugs the intake coil wont fire and have replaced it and plugs and wires crank sensor or cam sensor ignition control mod is ...
How do I remove a 2004 ford ranger xlt crankshaft pulley? the crank sensor may not be working. it controls the spark.
...changed Cancelled the check eng. light, but came back on within a day. Canadian Bought 97 Ford Ranger P1143 Air assist control valve range/performance Could Be your mass air flow sensor. Start
97 Ranger 2.3 cranks stumbles and dies 97 Ranger 2.3 cranks stumbles and dies, I can hear the fuel pump prime and I have changed the fuel filter. the truck will start with fluid. I have also hooked up
...cylinder is the number 1 cylinder on a 97 2.3 liter 4 cylinder ford ranger THE ONE HEAR THE RADIATOR ( FRONT ONE ) The front engine cylinder / # 1 , 2 , 3 , 4 from front to rear from ford motor ...
Question about 1987 Ranger
Does a 1987 Ford Ranger 2.9 V6 truck have a crank sensor? If so, where is it located? No it just has a distributor pickup coil, that in a sense is the crank sensor. These were a part that failed often
Question about 2000 Ranger SuperCab
I have a 2000 Ford Ranger that is getting fuel,spark, cranks over but wont start. No codes are shown, what sensors would affect it to not start Crank or camshaft sensor
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions