...the go to the underside of the intake. I need to know the proper steps to remove the upper intake Thank you http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528008effd this should ...
Question about 2004 TrailBlazer
...remove the upper intake manifold to get to it. its accessable by simply removing the air cleaner box. if you have trouble getting to it you can remove the throttle body at the end of the intake (2 ...
...Remove the upper intake manifold to service the lower intake. The 3.8L (VIN 1) supercharged engine uses a manifold similar to the 3.8L (VIN K), but the supercharger serves as the upper manifold. ...
...2001 infinite i30 1. Detach everything connected to the upper Intake manifold 2. Remove the upper Intake Manifold 3. Remove the fuel rail and injectors 4. Remove the IM 5. Replacement is the
...remove upper intake manifold to reach valve cover close to firewall. 1) The location of spark plugs 456 are under the plastic shield in front of the engine. It takes an 8mm socket to remove the three ...
upper intake is 16 ft lbs for 2000 Chevy Malibu. I replaced the intake gaskets and while performing the torque for the upper intake, it broke from the ends where the bolts are
...Remove the upper intake manifold. INSTALLATION: 1. Install the upper intake manifold gasket. 2. Install the upper intake manifold. Use care not to pinch the injector lines between the upper and lower ...
...upper intake manifold located on a 1997 Chevy 2500 van? The upper part of the intake manifold is the plastic part of the assembly, it's held on with small 10 millimeter headed bolts. NOTE: This ...
...remove repair this broken bolt. Cost about $50.00 I had 2 bolts in the upper plastic intake break due to corrosion. They could be removed with my fingers from the lower manifold, and easily ...
Question about 2004 Escape
...Intake Manifold ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions