Questions & Answers for: remove upper ball joint 95

...Remove and discard the upper ball joint nut. WARNING Do not use a hammer to separate the ball joint from the wheel knuckle or damage to the wheel knuckle will result. WARNING Do not damage the ball ...

Ad

Question about 1999 S-10 Pickup

1 Answer

...remove upper ball joint cotter pin and nut -remove lower ball joint cotter pin and nut -with pickle fork/ball joint removal tool remove both upper and lower ball joints from steering knuckle ...

Ad

...Remove upper arm and upper arm shaft assembly. Remove dust cover. Inspection Using preload socket, ensure breakaway torque for upper arm ball joint is 3-13 INCH lbs. (0.3-1.5 N.m). Replace upper arm ...

Remove an upper ball joint from a 98 Civic how do you remove an upper ball joint from a 98 Civic? Removal & Installation The upper ball joints cannot be replaced separately. If the ball joints ...

Question about 1997 Thunderbird LX

1 Answer

remove the ball joint nut and separate the lower control arm by prying the control arm down, then use a bungee cord to hold the strut/spindle out of the way, then use the ball joint tool to remove and

...Upper ball joints are not replaceable. The upper ball joint is part of the upper control arm bushing joint and is not serviced separately. If the upper ball joints are found to be defective, the ...

...Remove the upper control arm by removing the nuts on the engine side of the arm holding it to the frame. Use a wrench for this, but as the bolts are loosened, keep the alignment shims together that ...

Question about 2004 Optima

1 Answer

...remove the upper ball joints? You have two options. 1. You can replace the upper control arms which come with the ball joints. Replacing is simple. Remove the nut that holds the ball joint to the ...

...arm anchor bolts. Remove the upper arm from the vehicle.Do not disassemble the upper arm. If the ball joint or bushings are faulty, or the upper arm is damaged, the entire upper arm must be

Question about 1996 Thunderbird LX

1 Answer

how to replace ball joints on 1996 thunderbird The upper ball joints are replaced with the entire control arm assembly. The lower ball joints are pressed in and out with the aid of a special press.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...