Removal of Sealing Plate on Rear A/C Underbody Housing The nut won't budge!!! Driving me crazy!!! Is there some special trick to removing the sealing plate? if the nut is to big for the hole and ...
cannot locate the oil drain plug on a 99 audi a4 You must first remove the underbody engine pan to gain access to the oil pan. the plug is in the oil pan and is clearly visible.
...underbody. Remove and discard the complete EVAP canister vent hose assembly. Position and secure the new assembly to the underbody using the existing hole and mounting bolt. Tighten Tighten the ...
do you remove underbody panel to access oil drain glog on 2006 zepher? yes
REMOVE THE NUT AT THE UNDERBODY BRACKET. DETACH THE CLIP FROM THE UNDERBODY.RELEASE THE CABLE END FROM THE EQUILIZER.. SPECIAL TOOLS AVAILABLE AT AUTO PARTS STORES ARE AVAILABLE AND MAKE DISCONNECTING
Question about 1994 LeSabre
...remove inlet filter from underbody mounting, two bracket screws attaching compressor mounting bracket to suspension, and then remove compressor and bracket assembly toward the rear of the car next to ...
...remove underbody protection. Installation location: On transmission housing at bottom right. Unlock plug (1) and remove. Release screw. Withdraw pulse generator (2) from transmission housing. ...
Question about 1994 LeSabre
...underbody. Remove the clips from the underbody and discard. Disconnect the vent valve pipe at the EVAP canister. Remove and retain the EVAP canister vent valve bracket mounting bolt. Remove the ...
Question about 1994 LeSabre
...underbody mounted spare tire only). Remove the fuel tank shield Disconnect the vent valve electrical connector. Disconnect the vent hose Bend back the tang on the bracket. Remove the vent valve from ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions