...timing chain. The 3.0L uses a timing belt, which has to be replaced at regular intervals. Typically, the 3.3 & 3.8, which both use a timing chain, don't have to be replaced nearly as often but still ...
...timing chain cover. There should be two (2) wires coming from the wiring cluster going down to this sensor. The Sensor is held on by a 10mm bolt. To ease your access: Remove the Air Filter Cover and ...
...Remove the timing belt covers. Rotate the crankshaft until the sprocket timing marks are aligned. The crankshaft sprocket timing mark should align with the oil pump timing mark. The rear camshaft ...
...Remove timing belt. Refer to Engine for procedure. Remove water pump mounting bolts. Separate pump from water inlet pipe and remove water pump. Timing Belt Removal Raise vehicle and remove accessory ...
Remove or disconnect the following: Negative battery cable Oil pan Timing chain cover Oil pump from the case cover To install: Install or connect the following: Oil pump to the front cover. Torque the
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions