Questions & Answers for: remove tailgate handle

...TAILGATE TO REMOVE THE OLD TAILGATE LATCH? THANK YOU Itis easier to cut out the metal tailgate section, about 3" x 3" section in front og=f the lever. see photos at ...

tailgate from the outside and remove the broken latch. Remove the pull handle loop on the interior side of the tailgate (2 screws), unsnap the inside plastic tailgate interior panel, and pull down the

...be connected any more? We have the same problem, remove the panel on inside tailgate and you will find the handle broken, it is made out of pot metal. You need new handle from dealer or salvage

...clip. it is a plastic clip that locks on rod insert new one in handle then install rod and snap clip down. to gain access you will have to remove tailgate bezel and these usually break when

remove the tailgate handle to install a new bezel? YES I THINK IF YOU LOWER TAILGATE YOU WILL SEE BOLTS REMOVE AND TAILGATE RELEASE HANDLE WILL COME OUT TWO PLASTIC CLIPS HOLD RODS ON LEVER REMOVE FOR

...remove the panel you should be able to open the tailgate by pulling on the thin cable to unlatch the latches from both ends of the tailgate and a good look at the handle mechanism will tell you what ...

...tailgate remove these to get the handle out yes there is two rods and the other is the one with the problem if you dont see it remove the screws for the inner plastic moulding, some have an plastic ...

...TAILGATE REMOVE THE HANDLE MOUNTING BOLTS.ROTATE THE PLASTIC RETAINING CLIPS OFF THE CONTROL RODS AND DETACH THE RODS FROM THE HANDLE. REMOVE THE BOLTS AND WITHDRAW THE LATCH FROM THE END OF THE ...

...remove the tailgate's panel cover. The panel is affixed to the tailgate with about six to eight plastic stays on the back side of the panel. You will need a "L"-shaped tool (The tool looks like a ...

...from both sides inward and the tailgate should open. Remove the 3 large star shaped screws------------------------------------------------------------------------------------------- Tacho Pro ...