Shark Euro-Pro G1490 The iron was working then shut off like it sat idle for a while but I was still using it. The button to increase temp back to "max" won't move past the On light now so I'm not ...
...to remove rear cover. Can't get the lower portion of back cover to release. What is the trick? pry rubber feet from the bottom below the two lower screw holes there two screws under the rubber feet
SCREWS AND I PUT THEM OUT....BUT THE PROTECTOR DOESN´T RELEASE....HELP Right below the button that you press to select fabric is that black rubbery piece. Use a screw driver to pry it up and then
...Remove the back plate where the cord attaches to the iron... there are 4 screws visible and another 2 screws hidden under the two rubber feet...These are joined together by a rubber strip and can be ...
...cord on the rubber insulator and screw it to the heater terminal. gm my name is akoyaw rudder. my question is what type of tool is needed to remove the screws from the back of my G1435N product thank ...
screws right below the power cord, remove them and fix the cord's terminals/contacts or the cord itself. Good Luck!! A HELPFUL - 4 THUMBS - rating for this solution would be greatly appreciated. Thank
How to remove back cover of Shark Iron? Automatic off will not turn on. 6 screws hold the cover on, 4 are visible, two are under bumpers on bottom. pry out the bumper.
Question about Shark GI490 Iron
THERE IS A SCREW OR OTHER FASTENER AT THE FRONT OF THE IRON I CANNOT GET TO, TO REMOVE THE TOP FROM THE BASE. HOW CAN I ACCESS THAT SCREW? see the diagrams . God bless you
Question about Shark GI490 Iron
...shark model G1568 iron?? We have a Euro Pro GI472, which kept going off and on, and the problem seemed to be an intermittent connection in the power circuit. If we "fiddled" with the cord, the power ...
Usually answered in minutes!
202 Questions
119 Questions
145 Questions
74 Questions
82 Questions