...In order to free wheel the tiller you have to remove the pins that go thru the wheel rim hubs and then it will roll without starting it. Hopefully the rims are not rusted to the wheel shaft. ...
Question about Pony Garden Tiller
...remove the wheels so I can replace the tires. I removed the end caps on the wheels and there are no nuts holding them. Appears that they are connected via a through shaft pin only. ...
Question about Bilt Pony 6.5 Hp Rear Tine Tiller
...remove any sharp edges. Then grease the wheel shafts and carefully slide the new wheel seals on and use a piece of plastic PVC pipe cut square that will slide over the shaft and gently drive the seal ...
Question about Bilt Pony 6.5 Hp Rear Tine Tiller
...use a small impact wrench to remove the bolt. These are normal RH threaded bolts. Be aware that after you remove the bolt you may still not be able remove tire assembly if it has rusted on to
Question about Bilt Pony 6.5 Hp Rear Tine Tiller
Troy Bilt TB 230 with power drive one wheel won't turn freely, Catches sometimes when pushing the mower; stopped when using drive, cleaned gears, works better but not freely Proper cleaning requires ...
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions