Questions & Answers for: remove roll pin reciprocating saw

...remove the brushes and after pushing them back solder them to the brass tubes. Lastly roll the armature by hand and look for any serious discoloration or differences on the commutator. Let me know if ...

...remove the "blade stump"as I really don't want to have to buy a new saw for the neighbor. Many Thanks, Jim What I would try is to spray some WD40 on the pin first and then see if you can find a small ...

...a small bar through it.. If you are talking about the clamp there are 2 roll pins that need to be removed. The shoe has screws that hold it into place. I would suggest going to Dewaltservicenet.com ...

...roll pin to hold the blade holder on. If you remove the blade clamp screw, you can move the blade holder back and forth on it. You will need to get a very small punch and drive it all the way out. ...