Questions & Answers for: remove replace 86 toyota pickup

Question about 1986 Pickup 4WD

3 Answers

86 toyota pickup fuse box diagram I need to replace the turn signal fuse but don't know which one it is. -thanks. Pat R. When I use my turn signal in my 1986 toyota pickup every 5-6 uses it blows the ...

Ad

Question about 1986 Pickup 4WD

1 Answer

...86 toyota pickup, Hi, my 86 toyota pickup did not have a digital clock so i bought one off ebay, it has four wires coming out of it do you know were they go? Thanks Mark if you look in the dash where ...

Ad

Question about 1985 Pickup

1 Answer

...86 toyota pickup 22re 2 wd motor home , replaced rear output seal and still leaks is there an internal seal?? No there is no internal oil seal in the tail housing. Maybe you damaged the seal when ...

how to replace headlights on 1992 toyota pickup Remove the screws from the chrome trim around the lamps and they should fall into your hands.Remove the plug and reverse all to install.

how to replace headlight of 1993 toyota pickup truck Remove screws holding trim around headlight, some models require the grille to be removed. Headlight then pulls out and can be unplugged.

...toyota 4x4 pickup To remove old light, remove screws holding the trim around the headlight. Some models require removing the grille to access them. Headlight should pull out and you can detach the ...

...86 4Runners were built on a Toyota pickup chassis. What model pickup was that? I'm looking for a trailer hitch, but catalogs don't list the '86 4Runners. They start at '87s. So I need to know what ...

Question about 1989 Pickup SR5

1 Answer

...Toyota Pickup I have removed the mounting screws for the front turn signal and the clips for the grill, but the turn signal lens cover will not come loose and I am afraid to apply more torque. The ...

...plugs wont I had to replace the magnetic pick-up sensor on the side of the distributor that tells the coil when to fire on my 86 truck. It was $80 and slips onto the distributor held on by the

toyota pickup On my 1986, you have to take the grille off which is held in place by plastic push and twist fasteners. It's a pain. Then you have access to remove the headlight securing frame that fits

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...