Questions & Answers for: remove plastic panel rear hatch

remove the inner front fender panels (2), they are fastened with plastic pushbuttons. this exposses the light housings for the turn and fog lambs. This takes about an hour, but saves you alot of money

...plastic housing and insert them back into their frame holes - or you will never get the housing back on. Once you have the housing loose disconnect the inside tail gate light wire to remove the whole ...

...plastic housing and insert them back into their frame holes - or you will never get the housing back on. Once you have the housing loose disconnect the inside tail gate light wire to remove the whole ...

...rear door hatch lock is locked and will not unlock. how do I open hatch Hi, my 2005 Cadillac SRX rear hatch is locked and will not unlock, do anyone have an idea or have come across the same proble. ...

rear gate will open but not close srx 2007 rear hatch will open with remote but not close Could be the remote(have it checked) or the receiver in the vehicle. Have the codes checked.

...rear of your spare wheel well the ecm module that controls your locking and unlocking is located right where the clogged drains drain out to. Chances are there is water damage to that module. you can ...

rear hatch is not closed properly, or the "closed" sensor on the hatch is malfunctioning, the lights will stay on. They will also stay on if the dimmer control on the dash is turned all the way on, or

2010 cadillac srx rear hatch will not open with driver side control panel nor with remote key .how can i open it manually Klinketo open You can also cable Slot to fully engage

...CADILLAC REAR HATCH WILL NOT OPEN MANUALLY, WORKS WITH KEY FAB & internal on the door button Hi, Please use the internal button (in the car) and key simultaneously to try to open the hatch. Thank

...rear hatch won't open with key fob or handle Rear hatch ??? power liftgate or just won't unlock ? Power Liftgate System Components The power liftgate system includes the following components: • ...