Questions & Answers for: Hyundai how to remove pin

Ad

...remove split pin or flatten out tabs on lock washer and remove main nut the remove rotor to reveal wheel bearings replace re grease and reassemble dont do up main nut over tight make sure wheel is ...

Ad

...pin, then remove castle nut and washer from the front hub while applying the brake. Remove the caliper mounting bolts, and hang the caliper assembly to one side. To prevent damage to the caliper ...

Ad

...remove one of the caliper hinge pin (sliding pin) 14mm bolts. Flip the caliper out of the way and replace the pads and anti-rattle springs. Recompress the caliper piston all the way back into its ...

Question about Motor 2004 Sonata

1 Answer

...remove the pin on the crank pulley Why do you want to remove the crank pully pin? Anyway, to remove this pin, you need to remove the pully first. afterward, you can use a pair of vice-grips to twist ...

...around the wheel well. There are plastic thumb pins on the outer edges of this plastic covering. Remove the thumb pins and this plastic piece will come off. 3. Behind this you will find access to ...

...the pin will push in so u can remove the barell There could be a small hole or slot where you push a small drill bit to push a pin up hidden in the hole then turn the key to a cess and pull

...Accent? I see the one bolt at the bottom. At the top there is small rubber boot, so do I have to remove something from inside that boot, or the two big bolts that are about 17mm? hi from uk the ...

...pin and loosen the locknut Remove the washer and outer wheel bearing. If the drum is difficult to remove, remove the plug from the rear of the backing plate and push the self adjuster lever away from ...

Question about 2001 Accent

1 Answer

...manual window crank removed. cant find c shaped thing everyone talks about that is supposed to pop off The accent uses a roll pin, not a c clip. you have to drive out the roll pin to remove

Question about Motor 2004 Sonata

1 Answer

...i do to remove it and install the new one need to know asap the pin is a line up pin for the balancer it does not hold the 2 together if the balancer is stuck you may have to use a puller to remove ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2004 Hyundai Santa Fe
2004 Hyundai Santa Fe

1,446 Questions

2001 Hyundai Elantra
2001 Hyundai Elantra

1,154 Questions

2000 Hyundai Accent
2000 Hyundai Accent

1,113 Questions

2006 Hyundai Sonata
2006 Hyundai Sonata

1,216 Questions

2001 Hyundai Accent
2001 Hyundai Accent

1,057 Questions

Top Hyundai Experts

Marvin
Marvin

Level 3 Expert

85020 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...