Questions & Answers for: remove oil pan 2000 saturn

Question about 2000 L-Series

1 Answer

OIL LEAK OIL IS COMING FROM ONE BOLT FROM OIL PAN,2000 SATURN LS200 tighten the bolt if that doesnt work then remove the bolt clean and apply RTV black silicon around it and re install

Ad

...Remove the oil pan bolts from only the front and the sides. Loosen the rear oil pan bolts about 4 turns. Lightly tap the oil pan with a rubber mallet or pry in order to allow the fluid to drain. ...

Ad

Question about 2000 SL

1 Answer

Where is the oil plug on a 2000 Saturn SL1? On the bottom of the oil pan, back toward the rear on passenger side, if it is still original equipment It will take a 15mm box end wrench to remove it.

...oil on 2000 saturn lw 3.0 L Hi, all you need is a oil drip pan, 17mm and 32mm wrenches, cleaning cloths and appropriate oil and oil filter. Slide under your Saturn LW 3.0 and start changing the

Question about 2003 L-Series

1 Answer

...get the pan off. Is there another bolt or anything else I have to remove to remove the oil pan? the ac compressor bolts to the side of the pan and the trans bracket near the pass side of the ...

how to remove oil pan on 2000 saturn v6 l series oil pan replacement need a repair manual and jackstands--if its more then u can handlegetta pro

...oil pan. Remove lower transmission flange to oil pan bolts. Remove oil pan bolts. Using designated pry points to break loose the seal. Bump the pan with a rubber mallet to loosen the pan from the ...

Question about 2002 L-Series

1 Answer

...2000 Saturn Sl throttle body removal - YouTube ? 3:36 https://www.youtube.com/watch?v=XkA7325K51o Nov 5, 2011 - Uploaded by Mark Hofmann I removed the throttle body off my 2000 Saturn Sl.. ... ...

remove oil pan from a Dodge ram 2010 How to change oil pan on dodge ram 2000 - YouTube ? 2:42 www.youtube.com/watch?v=J1njjsDFjVk Apr 9, 2015 - Uploaded by Carlos Juarez How to change oil pan on dodge

...oil, remove the pan bolts, remove old gasket and clean it. Reinstall oil pan with a new gasket and your done. Don't over tighten your pan bolts! They will snap, or damage your oil pan, especially if ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...