Questions & Answers for: Kenmore Elite remove object

Question about Elite 45986 Front Load Washer

1 Answer

...is there a way to get to this area to remove the object. Thanks yes there is but you have to brake apart the hole machine and thats not ease I strongly recomend a tech and pay for this..good ...

Ad

Question about Elite 45986 Front Load Washer

1 Answer

...on back of washer ..remove top ck flowmeter on left side small round object with 2 small hoses and wires attached try taping it fixes problem replace it if not still suspect it and replace ...

Ad

Question about Elite 45986 Front Load Washer

1 Answer

...remove any foreign object? How can an object get in this area? ?F02? is a Long Drain error. If the drain time exceeds 8 minutes this error code will be displayed. In addition, a ?SUDS? error may also ...

...The basket is held onto the rear half of the outer tub simply by the bolt to the main pulley. Remove the bolt, remove the pulley, and the basket shaft should slip right out of the bearings of ...

Question about Elite 45986 Front Load Washer

1 Answer

...hardware store. They cost about a $1 more than a regular screwdriver) 1. Take out star screws and remove bottom kick panel. 2. There is a round cylinder facing you with a scew on cap. (This is the ...

Question about Elite 45986 Front Load Washer

1 Answer

How do I remove the back panel off Kenmore Elite Dryer Overfilling loads can cause small objects like pins, coins, and small socks to get between the tub abd Basket of your washer. The basket is held ...

Question about Elite Oasis 27052 Top Load Washer

2 Answers

...remove the pump. (Be prepared for a little water to spill out) 5. Clear the pump of any foreign object and reassemble in the reverse order . I just did this with my own washer. There was a penny in ...

Question about Elite 45986 Front Load Washer

1 Answer

washing machine stopped working and light is flashing f21 Remove bottom panel, open the drain pump. You probably have something stucked inside the drain pump. Be carefull as there will be water ...

...remove objects stuck in the drum making noise during spin cycle You have to pull the back off or how ever to get into the main body and see if there is an object jammed up, or your bearings could be ...

Question about Elite Oasis 27052 Top Load Washer

1 Answer

sounds like loose pieces banging around during spin cycle could be loose coins, pens, or other non-removed pocket objects.Check your drum very closely particularly around the bottom.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...