Question about Arrow Fastener 509 9/16" T50 Staples
...jammed how do I remove the few staples. I have a similar issue with my T50m stapler. To remove the staples unscrew the locking nut near where you load the staples and remove the tapppered bolt. The ...
...remove jammed staples in staple gun? I have an Arrow T50 staple gun that I put some staples in. The staples are visible in the side window, but will not come out when I squueze the handle. I also ...
Question about 648967 Arrow Electric Staple Gun/brad Nailer
...remove -- a very small flat-tip screwdriver and needle-nose pliers usually work best. After you get all the jammed staples out, lubricate all moving parts with something akin to 3-IN-1 machine oil. ...
Question about Bostitch 18 Gauge Brad Nailer 1 - 1/4IN - BT125K - 2
remove each of the jammed staples. They will pull out I assure you. Then Use a little WD-40 or compressor oil to lubricate the working mechanism at the firing head. IF you must loosen up the mechanism
Question about Arrow Ht30 Light Wire Hammer Tacker
...jammed in the moving part (driver?) when using to staple. How do I clear the jam? first remove the the spring loaded rod that keeps the staples in place and tight, if you can see any part of the ...
...is jamme Open the area where more staples are inserted, remove the staples, then find the jammed staple. You'll probably have to wrench it out with pliers. Then insert the good staples and try
Question about Power Arm Extra Heavy Duty Stapler 224XHD Staples 240 Sheets
...remove the jammed staples and check for any obstruction in the stapler that could be causing the jam. If the obstruction is still present, you will need to disassemble the stapler to remove it. Once ...
Question about PHT150C] SharpShooter Heavy Duty Hammer Tacker - Carpet Nailers & Staplers
...jammed and I cannot remove the staple channel. The instructions do not address a jammed staple channel so, how does one remove it? The instructions for removing the staple channel are inadequate. Hi ...
Question about PHT150C] SharpShooter Heavy Duty Hammer Tacker - Carpet Nailers & Staplers
...removed in which case you will need to repeat to remove each piece of the jammed staple. Check also, the spring to ensure it's not twisted or damaged. Finally, fix in good staples and continue
Question about PHT150C] SharpShooter Heavy Duty Hammer Tacker - Carpet Nailers & Staplers
...up the stapler removed the bent staples from the cartridge and placed it back into the machine and it is still jamming. How do I correct this problem? Check for a broken staple jammed in the
Usually answered in minutes!
191 Questions
163 Questions
151 Questions
96 Questions