...a rattle/grinding sound for the first 15-20 seconds then it stops. Is it the turbo? I had the same problem with my saab 93, and it turned out to be the air con pump which set me back £250 plus
...control system 93 saab 9000 turbo Where can I get a free download of the wiring diagram section for the TCS on this 93 saab 9000 turbo? I don't have a source, but this guy might be able to
...saab 93 2.2 tid the bearings in the turbo on my 2001 saab 93 2.2tid have gone. Can i bypass the turbo asnd still use the car while i wait for a new turbo to arrive? No you can't.Internal damage will ...
93 Vector Sport. Turbo keeps cutting out 2005, 93 Vector Sport (150bhp). Turbo keeps cutting out and there is a sudden loss of power. No smoke coming out of the back. Times when it works and then ...
...plugs on saab 93 turbo 2.0 changing spark plugs on saab 93 to replace the spark plugs you need to remove the ignition cassette which is held in with 4 t-30 screws and the plugs are underneath
...door apart Panel is easy to remove with just 2 screws (#30 bit) in the door handle. You must first remove the cover from the handle used to close the door when getting in the car and the screws are ...
Question about 2004 Jetta
need exact location and picture of coolant tempture sensor on a 2008 saab 93 witha 2.0 turbo motor 2008 saab 93 with 2 0 turbo motor coolant sensor Google Search Hope this helps you....
Question about 2010 9-3
2004 saab 93 turbo REPLACED TEMP SENSOR AND 100 MILES LATER SAME CODE RETURNED There are 2 sensors. 1 in thermostat housing and the other just under inlet manifold.
...remove the door panel and then remove attaching linkage rods and unbolt latch assembly from door. Removing the door apnel is the hard part. Watch the vifd3eo How To Install Replace Remove Front Door ...
Question about 2010 9-3
I have a 2004 saab 93 arc turbo with code 686 how to fine wiring diagram for relay and check for low voltage
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
