Questions & Answers for: remove inside window crank 98

Question about 1998 Blazer

1 Answer

...remove the inside panel to repair it? remove all visable screws from panel and arm rest. Arm rest should come off. Use a flat thin tool or piece of metal and slip it between the panel and the metal ...

Ad

Question about 1998 Camaro

1 Answer

...98 chevy camaro will start sometimes but after i run it ,it wont start new fuel pump, and new fuel filter pulled # 1 spark plug out it cranked plug back in it and ran it now it wont crank again what ...

Ad

I need to install an interior door handle on a 1995 geo prism Remove your arm rest, window crank, and the door panel. Unbolt the door handle, disconnect the rod from the handle, and replace .

...remove the door panel to fix the lock assembly. Need to know if there are clips at the bottom of the door, or just the screws. There will always be clips attached to the panel from the inside-after ...

...Chevy Prism? Disconnect battery, remove lower rear seat (you will see a metal plate bolted down with a wire harness), Unplug fuel pump wire harness, remove fuel pump retaining bolts, install new one. ...

Question about 2001 Prizm

1 Answer

how do i re install the snap ring on the window crank of my 98 chevy 1500 Install ring onto window crank first then put against window shaft and smack it one time its done.

...crank ,, Try giving it a shot of starting fluid. You don't say if it's actually firing. If it tries or runs for a few seconds off of the starting fluid then try changing the fuel pump relay. ...

...on 98 chevy blazer if you can't get it to open from inside or out the lock broke get a new lock the open the window look down at the lock with a long screw driver break apart the lock it ...

...chevy prism starts but dies right away thinking its an electrical problem....maybe with the security Usually if the car has a factory anti-theft system it will not crank if there is a problem with ...

Question about 2001 Prizm

1 Answer

...Chevy prism was ran with very low oil filled oil but engine knocks and have trouble keeping it running Not good omen. Likely a bearing seized or broke on your crank shaft. knocking is usually an ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...