...ink supplies. Remove the printhead and soak it for about 5 minutes in 0.5" of very hot water. Gently blot the printhead on a soft damp paper towel to remove the excess water, then replace in the ...
ink cartridge, all copying (whether from printer or scanner) is multi-coloured when I keep pushing the "BLACK" button. I have removed both cartridged several times, replacing them carefully;
Remove the entire ink cartridge holder (not just the ink cartridges). It will lift out easily as a unit. Lower the gray arm that you lifted to remove the cartridge holder. 6. Close printer cover. Plug
Remove the entire ink cartridge holder (not just the ink cartridges). It will lift out easily as a unit. Lower the gray arm that you lifted to remove the cartridge holder. 6. Close printer cover. Plug
remove/change ink cartridge on pixma mp495 http://www.canon.co.uk/Support/Consumer_Products/products/Fax__Multifunctionals/InkJet/PIXMA_MP_series/MP495.aspx?faqtcmuri=tcm:14-774520&page=3&type
Question about PIXMA MX860 All-In-One InkJet Printer
...ink cartridges come to rest.At some pre determined count, it is programmed that the printer will give error code that must be overridden to allow printing to continue. At some future point, the ...
ink may not have been flowing to the printing mechanism correctly indicating a low level. Try running printer maintenance procedure and replace the cartridge. If the printer indicates a low level, you
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions