Questions & Answers for: remove ignition lock switch 2008

Question about 1999 Silverado 1500

2 Answers

ignition lock cylinder. Press and hold the DOOR unlock switch. While holding the DOOR lock switch in the unlock position, cycle the ignition ON, OFF, ON, OFF. Release the DOOR unlock switch. The doors

Ad

Question about 2008 Silverado 1500 2WD

2 Answers

...lock problem I have a 2008 chevy silverado crew cab and one of the door locks doesn't move and the others start to do the same if you hit the lock/unlock buttons a few times in a row. we have a 08 ...

Ad

Question about 2008 Silverado 1500 2WD

1 Answer

...ignition of a 2008 chevy silverado.how can i unlock the door.lock smith wants 50 to do it i had luck with a wire coat hanger once,go down between the door and windsheid where the door starts to curve ...

Question about 1977 Silverado 2500

1 Answer

...using a Lock plate press. Remove the directional switch screws (3).. Lift that switch out of the way to remove the ignition lock screww Pull out ign Lock Cylinder Reverse this procedure to ...

Question about 2008 Silverado 1500 2WD

4 Answers

lock stopped working so I replaced the actuator myself to save the $95 per hour labor charge from the dealer. I've also had to replace the power mirror switch on the drivers side. Now my power mirrors

...lock button still works for the passenger door but not the driverside door. I replaced the fuses and it still does not work. Any idea how to fix? Its the switches themselves..sometimes you can ...

...ignition switch stuck in off, key is incerted an removed easily, but will not turn, all solutions remove switch that i have found thus far require switch to be in run position for removal The problem ...

Question about 2008 Chevy Silverado - 1500, 4WD, automatic, without Autoride - Complete Lift Kit

1 Answer

2008 silverado ,the right side power door lock is not working the power door lock is not working on the passenger side Remove door cover and replace faulty lock or accuator.

Question about 2008 Silverado 1500 2WD

1 Answer

ignition. If you do not have Onstar service you will have to use a long piece of thin metal, possibly a straightened clothes hanger and work it into the upper part of the driver or passenger side door

2008 Chevy Silverado. My doors locked with keys in the ignition. I was able to push on both unlock buttons with a thick wire but still won't unlock. Any help would be appreciated. Your vehicle came ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...