Questions & Answers for: remove ignition 2005 honda accord

Question about 2000 Accord

3 Answers

ignition I have a 2005 Honda Accord. The key is stuck in the ignition. I tried moving the steering wheel, checking the park shift , putting my foot on the brake. Nothing seems to work. Do you have any

Ad

Question about 2005 Accord

1 Answer

...2005 Hondal Accord, but I can't figure out how to get the plastic cover on the steering column off without breaking it. I need to access the wiring at the ignition switch to do the install. I removed ...

Ad

remove plastic cover around top of steering column on '05 Accord I'm trying to install a remote start system on a 2005 Honda Accord, but I can't figure out how to get the plastic covers off of the top

remove the "ignition cover", ie. the plastic cover that says 3.0L, you will see a hose coming from the passenger front corner of the intake manifold, that is one of the two PCV hoses, the other one is

...ignition switch OFF, remove the inspection adapter and connect the ignition pulse generator connector. 10. Turn the ignition ON with the registered key. *The immobilizer system (HISS) returns to the ...

...now lock or unlock vehicle. Switch ignition OFF. Remove key. Check operation of all programmed keys. NOTE: If less than 3 keys are to be programmed, remove ignition key after programming last

...ignition for 30 seconds and it fired. any ideas why this happened As I understood,you had stiff brake pedal and the car on your attempt to start was not firing? and after 30 seconds it did? How the ...

Question about 2005 Accord

1 Answer

...ignition ? Did you use your original lock cylinder ? If you didn't you can remove it from the original column and use it in the new. Otherwise you will have to take it to a good locksmith with ...

I recently switched a master power window switch,,bad ground,,and only the drivers window worked I also had a draw on the battery which turned out to be a short in the radio which had displayed and on

Question about 2005 Accord

1 Answer

accord? no they not supposed to do this. it would need a new ignition wiring plug as its cutting out on turning cutting out by way of removing live to ecu controllers and radio. making the system dead

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...