Questions & Answers for: remove high brake light 2005

...brake light bulbs have blown excessively. Then about a month ago, the other bulb blew. Now I have no brake light at all. The 3rd top brake light, tail lights and turn signals all still work. We have ...

...brake light is on all the time without the brake beign on what do I need to do? on my 2005 chevy equinox check your fluid level on the master brake cylinder resevoir(RH side to the rear of the engine ...

brake light is loose can it be fixed without buying a new light? 3rd brake lights are usually just held with 1 or 2 screws.if the clip or plastic it screws into is stripped,you can usually find a used

...brake lights are not working on my 2005 chevy equinox..However, the top one works Check fuses if you haven't already. They are not all on the same fuse. There may also be an inline fuse. Check ...

...brake fluid; power steering fluid etc.) There will either be a clear symbol or words indicating which type of fluid to use. Make sure you use the type of fluid that is recommended by the manufacturer ...

...2005 Chevy Equinox. When I press on the brake, the odometer (and other lights) dim. Let off the brake, lights return to normal. What is it? make sure the vehicle is charging. that will cause the ...

high beams won't work on a 2005 chevy equinox Low beams work fine, but when you flip them high, there are NO lights. Replace The Bulbs

brake light wont work...I changed the bulb and the light works but when i push on the brake it wont light up...any ideas of what it might be... If you're sure the bulb is good, your next step would be

Remove the high mounted stop lamp assembly: 1. Remove the spoiler to high mounted stop lamp screws 2. Disconnect the electrical connector 3. Disconnect the washer hose 4. Remove the stop lamp from the

2005 Chevy equinox when releasing the emergency brake and the headlight switch is on auto the lights come on automatically except the tail lights. You probably have daytime running lights - when you ...