Questions & Answers for: remove headlamp unit

Question about 2002 Xterra

1 Answer

...headlamp unit?? If yes please explain as it's not obvious and I don't wish to damage the unit. The Xterra doesn't have stock xenon headlights, so are your lights aftermarket? If not, there is a ...

Ad

Question about 2000 Grand Cherokee

1 Answer

Remove the headlamp cover TOP Remove the mounting fasteners. Disconnect the headlamp unit electrical connector BACK Separate the headlamp from vehicle.CAUTION: Do not touch the bulb glass with fingers

Ad

...Remove headlamp module from vehicle. Disconnect wire connector from back of headlamp. Remove bulb from headlamp unit. INSTALLATION CAUTION: Do not touch the glass of halogen bulbs with fingers or ...

...remove the headlamp unit. Disconnect the lamp connectors and transfer lamps if replacing unit. INTREPID Release hood latch and open hood. Disconnect and isolate the battery negative cable. Remove ...

...Remove headlamp unit retaining screws. (bolts) 3) Remove headlamp unit to expose back of unit. 4) Disconnect wire connector from back of headlamp bulb. 5) Rotate retaining ring counterclockwise. 6) ...

Question about 2008 F 250 Super Duty 4WD

2 Answers

...remove the headlamp you will need to remove the grille then locate the bolts that hold the headlamp in. its not a sealed beam headlamp. It has to be placed in from the rear of the lense. Often times ...

Question about 2000 Grand Cherokee

1 Answer

...remove the headlightunit by simply wiggling it loose. 3. Disconnect the headlamp bulb wireharness connector located at the front of the headlight unit. This is locateddirectly above and between the ...

Question about 2007 Ram 1500 Quad Cab Sport

1 Answer

Remove or disconnect the following: Negative battery cable Push pins Bolts connecting headlamp unit to fender Bulb sockets from headlamp unit Headlamp unit To Install: Install or connect the following

...remove the whole headlight assembly to access the bulbs. I removed 2 screws but still I cannot pull the assembly out. There is something on the bottom that holds the assembly. Any ideas? Thanks. some ...

...Remove headlamp unit (2) Disconnect headlamp levelling motor electrical connector. (3) Rotate levelling motor one quarter turn counter clockwise. This will free levelling motor housing from the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...