Questions & Answers for: remove hatch panel freestar

...button is pushed. It sounds like it's unlocking but we can not open the back hatch door The latch is seized. You will have to manually unlock it by removing the panel on the inside of the

...has no key either what were the ford engineers smoking when they came up with that. OR is it planned obsolescence ! Try removing little square on inside of trim panel and opening the hatch thru ...

...hatch. the handle is intact but is either not engaging or the unlock function isn't working. getting tired of putting bikes in through the sliding doors. Please help! There is a tendancy for the ...

Rear Hatch, Handle came out, how do I replace the Rear Hatch, Handle came out, how do I replace the handle and how can I get the hatch open? the interior back panel has to be removed.

...hatch. you will need to clean up the lock because ther will be corrosion and then use a white grease to lube the whole thing. operate by hand a few times before you close it up. there is an access ...

...hatch are and was wondering were it might be coming from I had water coming into the rear storage area. Finally found where it the leak was. The plastic panel on which the license plate mounts was ...

...is to release. If no tool will work, try the shoe strings. Hope this helps. you would have to remove the inside panel from the hatch to access and open the latch mechanism then to remove and replace ...

...hatch out of it with WD40. Keep us updated. you'd have to take of the panel/interior and open it from the inside. I am just bookmarking your issue for now. I don't have access to 2004 shop manual ...

...hatch this morning.. How do i fix it? You will have to get a new handle, and remove the inner door panel to replace it. You will also need to open the door first by pulling on the rod with a pair of ...

...freestar back hatch lock won't unlock I have a 2004 Freestar van. Naturally we use the unlock button on the driver's or passenger's door to unlock the rear hatch, which has no ...