Questions & Answers for: remove harmonic balancer bolt nissan

Question about 1998 Pathfinder

2 Answers

remove the harmonic balancer on my 1992 Pathfinder, I needed to loosen the alternator and power steering belts, remove the cooling fan (4 10 mm nuts), remove the radiator (2 10 mm bolts hold it to the

Ad

...remove harmonic balancer bolt (19mm).If the harmonic balancer will not slide off the crankshaft then use a two finger gear puller. Place the harmonic balancer bolt back in the crankshaft but do not ...

Ad

...remove harmonic balancer ,remove timing belt covers, remove timing belt remove intake housinng once you have remove all the above, your freaken engine will look naked, you can see the location of the ...

...harmonic balancer. 3. Remove the retaining bolt. 4. With a puller, jack the harmonic balancer off of the crank shaft. You can rent a puller at your local auto parts store. It is easiest to access the ...

...remove harmonic balancer pulley from 2000 Pontiac Montana- in what direction to turn the bolt? Remove serpentine belt, to remove bolt turn counter clock wise, you will also need a Harmonic Balancer ...

Question about 2002 Montana

1 Answer

...remove the harmonic balancer, the cylinder head and timing cover must be removed and the piston should be at top dead center (TDC). Install the vibration damper by pounding it on, or use a special ...

Question about 2003 Montana

1 Answer

...remove harmonic balancer & replace YOU NEED A HARMONIC BALANCER PULLER TOOL AND A 15M SIX POINT SOCKET TO REMOVE HARMONIC BALANCER BOLT.TURN OFF RADIO AND REMOVE THE DRIVE BELT AND REMOVE THE ...

Question about 2005 Altima

2 Answers

...harmonic balancer pully or bolted to block facing it you normally have to pull pully to change sensor but some you dont you will need a puller and a installer if you have to pull the pully relay ...

...remove harmonic balancer on my 2000 toyota celica gt 1.8l you need to loosen the alternator to get the belt off then undo the bolt on the harmonic balancer. If you can't remove the harmonic balancer ...

2002 Nissan Xterra harmonic balancer bolt size width length I need specs on the harmonic balancer bolt it fell out last night I would take the old one out and measure it.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...