Questions & Answers for: remove gas tank katana

Question about 2005 GSX 600 F (Katana)

2 Answers

...gas valve then remove the bowl, clean and reinstall it. Doing this should get you back on the road. Please rate this solution. Thanks! I had a simular problem with my 05 katana.I simply drained my ...

Ad

Question about 1991 GSX 750 F (Katana)

1 Answer

91 gsx 750f sparkplug change how to remove farings, remove seat and gas tank

Ad

Question about 1995 GSX 750 F (Katana)

1 Answer

I am trying to change spark plugs can you tell me how to get to them remove seat 2 bolts under rear seat, remove gas tank

Question about 2001 GSX 750 F (Katana)

1 Answer

drain gas tank motorcycle 2001 katana 600 Remove fuel pipe from under side of tank. drain into a suitable container.

Question about 2003 GSX 750 F (Katana)

1 Answer

...gas in the tank you may be low. try this unless you already have. turn you fuel valve to primary and try again to star the bike. the other problem that happens is the fuel **** vacuum diaphragm may ...

Question about 2003 GSX 750 F (Katana)

1 Answer

where are my spark plugs located on my 06 katana 600f Under the gas tank remove gas tank then remove plug wire dont get them mixed up MOPAR KENNY

Question about 1997 GSX 600 F (Katana)

1 Answer

...gas tank and filter might be good to check out the tramission fluid and crankcase oil as well if it has been sitting for so long. Remember to but new gaskets for any covers you remove to do this ...

Question about 1994 GSX 600 F (Katana)

2 Answers

...gas tank. Remove the two bolts under the seat using a ratchet & socket...Grab the seat from the front by the gas tank and lift it up until the seat is around a 45-degree angle to the frame. Then ...

...wonderful day. HOW TO REMOVE K1 GSXR GAS TANK 2003 r6 taking off the fuel tank old gas Suzuki 1996 GSX R750 Service Manual OEM parts for Suzuki ...

Question about 1996 GSX 750 F (Katana)

1 Answer

gas is leaking. This can be caused by debris between the valve seat and the valve, or the rubber is cracked or hardened. In any case, usually there is 4 screws on the rounded bottom of the carburators

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66849 Answers

Are you a Motorcycles Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...