Questions & Answers for: remove garage door opener code

2010 dodge nitro. The roof mount antenna got broken off and part of it is still in the base. any suggestions TAKE A SMALL SCREW EXTRACTOR TAP IN & TURN OUT WITH CRESCENT WRENCH SHOULD REMOVE IT. i

i need to find the THROTTLE in my dodge NITRO 2010 dodge NITRO 2010 its located on or in line with the intake manifold, follow the air ducting from the air box and it will lead you right to it

2010 nitro dodge front vent not blowing air 2010 nitro dodge air not blowing from front vents Blend air door inop, either from vacuum leak, bad check valve or bad actuator.

Replaced thermostat in my 2010 nitro still no heat when driven highway or city Driven on highway and city, filled coolant, -Heater hose valve not open or the hoses are clogged. Good Luck mai

...the blend door actuator located on the driver side of the air distribution housing. Remove the two screws that secure the blend door actuator to the actuator mounting bracket and remove the ...

...2010 dodge nitro Remove the center console. It is under it. Better make sure that is the problem though. Could be wiring. Lots of things to check before replacing any part of it. This is the most ...

2010 Doge Nitro blows air towards windsheild not matter witch position the selector is in. Took it to the dealer and they said the Heater Housing and Control Head needed to be replaced. Suggestions ...

2010 nitro. have plenty of heat, just wont change positions door actuator not turning

...door and it starts dinging saying key is in ignition and now the key fob stopped working, so I have to manually unlock and lock all my doors and the other day I was using a car vacuum sweeping it out ...

2010 dodge nitro anti theft system put the key in the driver's side door lock, unlock the door, lock the door, then unlock the door again. Like. (7). How to reset the anti theft - DodgeForum.com Dodge