...Remove the front panel of the recovery tank by sliding it straight up. Slide the convertor half way down into the same slot. (Curved side down). The opening should be facing upward. Replace the ...
Question about SteamVac Carpet/Upholstery Deep Cleaner Vacuum
...Remove the tank front panel by sliding it straight up. Replace panel with converter (located on end of hose, end is shaped like front panel that you slide out.Before connecting tube to cleaner, make ...
Question about SteamVac F5914-900 SpinScrub Upright Vacuum
...front nozzle into the tank) Check the filter in the dirty tank lid, clean if necessary Remove the lower tank and look at the motor cover, locate a round hole, you should see a black ring (gasket). ...
Question about SteamVac Carpet/Upholstery Deep Cleaner Vacuum
how to assemble upholsthery cleaner to machine To install the hose, remove the upper tank lid and then remove the front panel (duct). insert the pointed side down and then put the lid back on.
...Remove recovery tank front panel (F) by sliding it straight up. Step 4. Replace panel with converter (G). Slide converter halfway down opening until it is firmly in place. Step 5. Before connecting ...
Question about SteamVac F5914-900 SpinScrub Upright Vacuum
...Remove recovery tank front panel (F) by sliding it straight up. Step 4. Replace panel with converter (G). Slide converter halfway down opening until it is firmly in place. Step 5. Before connecting ...
...Remove recovery tank front panel (F) by sliding it straight up. Step 4. Replace panel with converter (G). Slide converter halfway down opening until it is firmly in place. Step 5. Before connecting ...
Question about SteamVac Carpet/Upholstery Deep Cleaner Vacuum
...remove the front panel duct in front of the lower tank. Insert the hose end that looks like a triangleinto the slot where the froint panel was.re-install the lid on the tank. Tilt handle upright and ...
Question about SteamVac Carpet/Upholstery Deep Cleaner Vacuum
...Remove recovery tank front panel (F) by sliding it straight up. Step 4. Replace panel with converter (G). Slide converter halfway down opening until it is firmly in place. Step 5. Before connecting ...
Question about F5866-900 SteamVac Deluxe Wet/Dry Vacuum
...Remove recovery tank front panel (F) by sliding it straight up. Step 4. Replace panel with converter (G). Slide converter halfway down opening until it is firmly in place. Step 5. Before connecting ...
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions
