Questions & Answers for: remove craftsman edger blade

...remove craftman edger model #536-796526 which way does nut remove? Get some WD-40 and spray the area around the nut then let it sit for a few hours. This will get into the threads and loosen any rust ...

...craftsman lawn mower put a small tub on the ground , remove the dip stick , and tilt the mower on its side with the air cleaner / carb , up and let it drain out . or there is a drain plug under the ...

fuel mixture ratio? Homelite has a lousy website for technical info but most small 2 cycle engines burn a mix of 50:1 how do remove shaft on blade on sears craftsman,edger/timmer ,edger1.3.8hp

...edger. There is no way loosen the bolt holding the blade Can you grip the blade and hold it still with say a pair of Vise Grips and remove the bolt that way? Lock the grips on the blade and then when ...

...edger blade which way do you turn nut seems to be frozen Spray that ****** with some penetrating oil like PB Blaster or Liquid Wrench and let it soak on it overnight. The locking nut probably removes ...

...remove the blade, does the bolt turn clockwise or counterclockwise? As viewed from beneath, the bolt is loosened by turning it counterclockwise. They are generally pretty darn tight. Use a block of ...

4 hp craftsman edger/trimmer. Not getting a clean cut anymore on my grass. Does this one have a metal blade? If so the blade is removeable for replacement or for sharpening.

edger blade quit turning was working fine then blade quit turning remove and inspect blade for damage. if all is well check flex shaft conection, may have damaged the inner flex shaft or the ends to ...

have edger craftsman 536772210 3.8 hp bevel cut . which way does hex nut remove to replace blades counter or clockwise? Mike it will go counter clock wise.

...remove the end cap to add more line 25cc Craftsman Weed eater the screw just turns hi - can you get a small flat blade screw drive under the edge of the screw and lift while unscrewing it or the tips ...